Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 373

When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
▶
"Resuming BitLocker functionality" on page
RX2540 M7 Upgrade and Maintenance Manual
Processor (CPU)
107.
373