Replacing The Odd (3.5-Inch Chassis) - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

13.3.7

Replacing the ODD (3.5-inch chassis)

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Torx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶
"Checking boot priority" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
Removing the defective ODD
▶ Remove the ODD, see
page 411.
Installing the new ODD
▶ Install the ODD, see
RX2540 M7
93.
50.
76.
"Removing the ODD (3.5-inch chassis)" on
"Installing the ODD (3.5-inch chassis)" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
47.
92.
89.
50.
55.
Accessible drives
49.
402.
419