124
5.8
Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1.
Press the symbol
This opens the navigation interface.
Fig. 74: Using Automatic mode (1)
(1) - Automatic mode
2.
Press Automatic mode (1).
The interface of Automatic mode opens. The program
stored last is loaded.
The display shows tiles and information below the upper bar that
vary with the selected program:
Fig. 75: Using Automatic mode (2)
Programming Commander DELTA
to bring up the navigation pane.
Operating Instructions D887 e-con - 00.0 - 11/2023
①