Sewing; Automatic Mode - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Settings via the software
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
5.4.3

Sewing

Altering parameters whilst within the seam
1. Move the pedal to the 0 position.
2. Change the desired parameter on the control panel.
3. Press the pedal forwards and sew.
 The seam will be sewn using the altered parameter value.

5.5 Automatic mode

Program numbers 001 to 999.
1. Use   to select the Program parameter.
/
2. Use   to select the program number 1 or another one (if
/
available).
 The controller switches to automatic mode and the following
information appears on the display:
Fig. 32: Displey in Automatic mode
The following table shows the individual symbols on the display
and the functions of the keys on the control panel.
53