102
5.6.7
Using bobbin wind mode
A bobbin can be wound without sewing. You can choose if you
want the winding process to stop automatically when the bobbin
is full or not until the bobbin shaft has completed a certain number
of rotations.
To use bobbin wind mode:
1.
When setting up the user interface ( p. 76), drag the tile for
bobbin wind mode onto the main screen.
2.
Press
to return to Manual mode.
3.
Press on the bobbin wind mode symbol and choose between
Lever and Turns.
4.
Define and confirm the settings.
Bobbin wind mode begins.
5.7
Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1.
Press the symbol
This opens the navigation interface.
Programming Commander DELTA
to bring up the navigation pane.
Operating Instructions D869 e-con - 00.0 - 06/2023