Assembling The Stand And Table Plate; Assembling Stand Mg - Dürkopp Adler 667 Operating Instuructions

3

Assembling the stand and table plate

3.1 Assembling stand MG 55-3

3
4
4
Fig. 2
– Assemble the stand in accordance with the illustration.
– Fasten the pedal 2 to the stand brace 1.
– Affix the stand brace 1 to the stand.
– Align the pedal after assembling the entire machine (see chapter 3.4).
– Screw on the holder for the oil can 3.
– Turn the adjusting screw 4 to ensure the stability of the stand.The stand
must rest with all four feet on the floor.
1
2