Procedure
Procedure
1. If needed, loosen the shipping screws, and then use the chassis ear latches to slide the server out of the rack until the rail-release latches
are engaged.
2.
WARNING:
WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-release latches. The inner rails could pinch
your fingers.
Press and hold the rear-end rail-release latches (callout 1), and then slide the server out of the rack until it is fully extended (callout 2).
Remove the front bezel
Remove the front bezel
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
47