10. Remove the right chassis ear assembly:
a. Remove T-10 screws (callouts 1 and 2).
Retain the screws. These screws will be used to secure the new right chassis ear assembly spare.
b. Pull the right ear and front I/O port assembly simultaneously (callout 3).
LFF drive configuration
SFF drive configuration
c. Remove the front I/O port assembly from the cage.
Retain the screw and the cage. This screw will be used to secure the new front I/O port assembly spare on the cage.
LFF drive configuration
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
92