Removing And Replacing A Drive Blank - HPE ProLiant DL320 Gen11 Maintenance And Service Manual

SFF drive
Results Results
To replace the component, reverse the removal procedure.

Removing and replacing a drive blank

Removing and replacing a drive blank
About this task About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with CAUTION:
either a component or a blank.
Procedure Procedure
1. If installed, remove the front bezel .
2. Remove the drive blank.
LFF drive blank
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 64