Removing And Replacing A Fan - HPE ProLiant DL320 Gen11 Maintenance And Service Manual

Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove fan blanks from the fan bays, if installed.
Results Results
To replace the component, reverse the removal procedure.

Removing and replacing a fan

Removing and replacing a fan
About this task About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with CAUTION:
either a component or a blank.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 109