Table of Contents
Advertisement
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the middle cover .
9. Remove the fans.
10. Remove the fan wall.
Retain the screws and fan wall. These screws will be used to secure the fan wall after replacing or installing the internal component.
SFF or 4 LFF drive configuration:
12 LFF drive configuration:
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
56
Advertisement
Table of Contents
