HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 201

Item Item LED LED
1 Fault/Locate
2 Online/Activity
EDSFF SSD LED definitions EDSFF SSD LED definitions
This server supports hot-plug Enterprise and Data Center Standard Form Factor (EDSFF) drives. Specifically, E3.S PCIe5 NVMe SSDs. The
EDSFF drive carrier has two LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
State State Definition Definition
Solid amber
Solid blue
Flashing amber/blue (1
flash per second)
Flashing amber (1 flash per
second)
Off
Solid green
Flashing green (1 flash per
second)
Flashing green (4 flashes
per second)
Off
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
This drive has failed, is unsupported, or is invalid.
The drive is operating normally and being identified by a
management application.
The drive has failed, or a predictive failure alert has been received
for this drive. The drive has also been identified by a management
application.
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
The drive is operating normally and not being identified by a
management application.
The drive is online and has no activity.
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
The drive is operating normally and has activity.
The drive is not configured by a RAID controller or is a spare drive.
201