15. To remove the 2 SFF drive backplanes from a server with a GPU riser cage, pull up the release latches (callout 1) and detach the
backplanes (callout 2).
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the 8 SFF drive backplane
Removing and replacing the 8 SFF drive backplane
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task
About this task
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
67