Table of Contents
Advertisement
12. Set the anti-tilt wires to the locked position.
13. Place the processor-heatsink module on a flat work surface with its contact side facing up.
14.
CAUTION: Do not press down on the dust cover. Pressing down on the dust cover might damage the processor socket.
CAUTION:
If you are not immediately installing the replacement processor-heatsink module, install the dust cover on the empty processor socket:
a. Press and hold the grip tabs on the dust cover (callout 1).
b. Carefully lower the dust cover onto the bolster plate guide posts (callout 2).
Make sure that the corner holes of the dust cover are properly engaged with the guide posts on the bolster plate.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
126
Advertisement
Table of Contents
