HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 178

located on the chassis.
4. Click OK.
5. Type the serial number, and then press Enter
6. Select Product ID, and then press Enter
The following warning appears:
Product ID is modified only by qualified service personnel. This value must match the product
ID located on the chassis.
7. Type the product ID, and then press Enter
8. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Date and Time.
9. Configure the date and time settings:
Date (mm-dd-yyyy)—Enter the date in a month-day-year (mm-dd-yyyy) format.
Time (hh:mm:ss)—Enter the time in a 24-hour format (hh:mm:ss) format.
Hour Format—Select either a 12- or 24-hours format. (This menu is supported in Gen10 Plus and later servers.)
Time Format
Coordinated Universal Time (UTC) —Calculates the time stored in the hardware real-time clock (RTC) from the associated Time
Zone setting.
Local Time—Removes the use of the Time Zone setting. This option is useful for addressing interaction issues in Windows
operating systems set in legacy BIOS boot mode.
Time Zone—Select the time zone for the system.
Daylight Savings Time—Select whether to enable DST in the system time setting.
10. To confirm and save the settings, press F12
The server automatically reboots.
Results Results
The installation is complete.
Removing and replacing the front USB and Display port Y-cable Removing and replacing the front USB and Display port Y-cable
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-10 Torx screwdriver
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. If installed, remove the front bezel .
Enter.
Enter.
Enter.
F12.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 178