Table of Contents
Advertisement
This symbol indicates the presence of a laser device in the product that may exceed Class 1 limits. Refer to the product
documentation for more information.
This symbol indicates the presence of moving parts inside the product that may present a pinch point if improperly contacted.
WARNING:
WARNING:
Hazardous moving parts. Do not insert any tools or any part of your body into the product while it is operating or in
any openings.
Rack warnings and cautions
Rack warnings and cautions
WARNING:
WARNING:
When all components are removed, the server weighs 12.00 kg (26.45 lb ). When all components are installed, the server
can weigh up to 29.60 kg (65.23 lb ).
Before configuring your rack solution, be sure to check the rack manufacturer weight limits and specifications. Failure to do
so can result in physical injury or damage to the equipment and the facility.
WARNING:
WARNING:
The server is heavy. To reduce the risk of personal injury or damage to the equipment, do the following:
Observe local occupational health and safety requirements and guidelines for manual material handling.
Get help to lift and stabilize the product during installation or removal, especially when the product is not fastened to
the rails. The server weighs more than 12.00 kg (26.45 lb ), so at least two people must lift the server into the rack
together. An additional person may be required to help align the server if the server is installed higher than chest level.
Use caution when installing the server in or removing the server from the rack.
Adequately stabilized the rack before extending a component outside the rack. Extend only one component at a time. A
rack may become unstable if more than one component is extended.
Do not stack anything on top of rail-mounted component or use it as a work surface when extended from the rack.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
42
Advertisement
Table of Contents
