Table of Contents
Advertisement
16. Using an alcohol wipe to remove the existing thermal grease from the processor and heatsink.
Allow the alcohol to evaporate before continuing.
Installing the heatsink
Installing the heatsink
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-30 Torx screwdriver available.
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure
Procedure
1.
CAUTION:
CAUTION:
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED. Any
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED.
damage to them might require replacing the system board.
Do not touch the pins on the processor socket and the processor.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
129
Advertisement
Table of Contents
