Fan Numbering - HPE ProLiant DL320 Gen11 Maintenance And Service Manual

Item Item Description Description
1 Drive bay count
2 Drive form factor
3 Maximum link rate per lane (GT/s)
4 Port link width and interface
5 Universal backplane manager (UBM) options
6 Drive carrier type
Tri-mode controller support for x1 U.3 NVMe, SAS, and SATA drives. System board connection supports SATA drives only.
1
CPU direct attach or tri-mode controller support for x4 U.3 NVMe or x1 SAS and SATA drives.
2
CPU direct attach or tri-mode controller support for x4 U.2 NVMe drives.
3

Fan numbering

Fan numbering
To provide sufficient airflow to the system, the server is by default populated by five standard fans or seven high performance fans. There
are a total of 7 fans.
The arrow points to the front of the server.
Fan and heatsink requirements Fan and heatsink requirements
Values Values
Number of drive bays supported by the backplane.
LFF—Large Form Factor
SFF—Small Form Factor
E3.S—Enterprise and Datacenter Standard Form Factor (EDSFF)
12G
16G
24G
32G
x1 NVMe/SAS—U.3 NVMe, SAS, or SATA
x4 NVMe/SAS—U.3 NVMe, SAS, or SATA
3
x4 NVMe—U.2 NVMe
x4 NVMe—E3.S
UBM2—Segregated SAS/SATA
UBM3 or UBM6—Converged
UBM4 or UBM6—Segregated U.2 NVMe
UBM5 or UBM7—EDSFF
BC—Basic carrier (SFF)
LP—Low-profile carrier (LFF)
EC1—E3.S carrier
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
1
2
207