Removing And Replacing The Access Panel - HPE ProLiant DL320 Gen11 Maintenance And Service Manual

2. Press the bezel release latch (callout 1), and then pivot the bezel open (callout 2).
3. Release the right side of the bezel from the front panel (callout 3).
Results Results
To replace the component, reverse the removal procedure.

Removing and replacing the access panel

Removing and replacing the access panel
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 59