Table of Contents
Advertisement
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Remove the server from the rack .
7. Place the server on a flat, level work surface.
8. Remove the access panel .
9. Remove the GPU riser cage.
10. Remove the accelerator.
11. Flip the riser cage and remove the screw on the bottom.
Hold the riser cage on either side with both hands.
12. Remove the GPU riser bracket.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
100
Advertisement
Table of Contents
