HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 164

12. Remove the boot device carrier:
a. Drag the carrier latch, and then pivot the latch open (callouts 1 and 2).
b. Slide the carrier out of the boot device cage (callout 3).
13. If installed, remove the SSD from the boot device carrier:
a. Remove the SSD mounting screw (callout 1).
b. Tilt the SSD with the M.2 slot at a 45° angle (callout 2).
c. Carefully remove the SSD from the M.2 slot (callout 3).
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 164