HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 208

Fan and heatsink requirements Fan and heatsink requirements
The table lists the fan and heatsink requirements for the server depending on the hardware configuration. For more detailed information,
see the product QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs
Configuration Configuration Fan Fan
8 + 2 SFF drives Standard
High performance
4 LFF drives Standard
High performance
12 LFF drives High performance
2 dual width GPU High performance
2 single width GPU High performance
HPE Trusted Platform Module 2.0 HPE Trusted Platform Module 2.0
The HPE Trusted Platform Module 2.0 (TPM) is a hardware-based system security feature that securely store artifacts used to authenticate
the platform. These artifacts can include passwords, certificates, and encryption keys.
The TPM 2.0 is embedded on the server system board.
The TPM 2.0 is supported with specific operating system support such as Microsoft Windows Server 2012 R2 and later. For more
information about operating system support, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive Encryption feature, see the Microsoft
website (https://www.microsoft.com https://www.microsoft.com).
Subtopics Subtopics
HPE Trusted Platform Module 2.0 guidelines HPE Trusted Platform Module 2.0 guidelines
BitLocker recovery key/password retention guidelines BitLocker recovery key/password retention guidelines
HPE Trusted Platform Module 2.0 HPE Trusted Platform Module 2.0 guidelines
CAUTION: CAUTION:
Always observe the TPM guidelines in this section. Failure to follow these guidelines can cause hardware damage or
halt data access.
If you do not follow procedures for modifying the server and suspending or disabling the TPM in the OS, an OS that is
using TPM might lock all data access. This includes updating system or option firmware, replacing hardware such as the
system board and drives, and modifying TPM OS settings.
Changing the TPM mode after installing an OS might cause problems, including loss of data.
Hewlett Packard Enterprise SPECIAL REMINDER: Hewlett Packard Enterprise SPECIAL REMINDER: Before enabling TPM functionality on this system, you must ensure that your intended use
of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable.
https://www.hpe.com/info/qs).
Processor TDP Processor TDP
≤ 185 W
185 W < CPUs with TDP ≤ 270 W
≤ 185 W
185 W < CPUs with TDP ≤ 270 W
≤ 185 W
185 W < CPUs with TDP ≤ 270 W
185 W < CPUs with TDP ≤ 270 W
CPUs with TDP ≤ 185 W
185 W < CPUs with TDP ≤ 270 W
CPUs with TDP ≤ 185 W
guidelines
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
Ambient operating Ambient operating Heatsink Heatsink
temperature temperature
30°C (86°F) Standard
Performance
30°C (86°F) Standard
Performance
30°C (86°F) Standard
Performance
≤ 25°C (77°F) Performance
Standard
≤ 25°C (77°F) Performance
Standard
208