Table of Contents
Advertisement
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the middle cover .
9. Remove all drives .
10. Disconnect all cables from the drive backplane.
Drive power cable
Drive controller cable
11. If locked, unlock the E3.S drive cage.
12. Remove the E3.S drive cage.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide
70
Advertisement
Table of Contents
