HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 167

13. Remove the SSD from the boot device carrier:
a. Remove the SSD mounting screw (callout 1).
b. Tilt the SSD with the M.2 slot at a 45° angle (callout 2).
c. Carefully remove the SSD from the M.2 slot (callout 3).
14. If you are removing the second boot device carrier, repeat steps 3 and 4 on the lower boot device carrier slot.
Results Results
To replace the component, reverse the removal procedure.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 167