Removing And Replacing A Power Supply Blank - HPE ProLiant DL320 Gen11 Maintenance And Service Manual

Results Results
To replace the component, reverse the removal procedure.

Removing and replacing a power supply blank

Removing and replacing a power supply blank
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply, power supply blank, or dual slot
power supply adapter to cool before touching it.
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure Procedure
1. Remove the power supply blank.
2. Immediately install the new power supply blank.
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 81