HPE ProLiant DL320 Gen11 Maintenance And Service Manual page 87

CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the DIMM guard.
Retain all screws for future use.
Left
Middle
HPE ProLiant DL320 Gen11 Server Maintenance and Service Guide 87