Table of Contents
Advertisement
%
OPERATION
The 8950-SID menu system consists of a main menu with two or more
choices for each menu item. The sub menu items are shown in lower case
to allow them to be easily distinguished from the main level items. Figure
3-2 is an overview of the front panel menu system, and shows all the menu
items and where you will find the menu choices. To enter the front panel
programming menu, press the SETUP key.
The two vertical arrow keys (#, $) allow you to move vertically within the
menu tree. When you have selected the desired menu item, press the "
key to reveal the choices for that item. The choice that is currently selected
will be blinking. When you have selected the desired sub menu choice
press the SELECT key to save your choice.
When you have made all the desired changes, press the SETUP key to
return to the normal display mode.
To aid in finding the descriptions of the various menu items in sections 3.3
to 3.4, the drop down menu items and its sub menu items are shown in the
margin of the manual, next to the description as shown.
Each of the menu items is described in section 3.3, with an explanation of
what each choice does.
3.2.1. Engineering Setup Menu
The Engineering Setup menu allows the advanced user to change various
internal parameters of the 8950-SID, or to invoke several advanced modes.
This menu should be used by advanced users only, as improper use can
overwrite user setups.
Figure 3-3: Overview of the 8950-SID Engineering Menu
Model 8950-SID Digital Source ID Decoder Manual
DISPLAY LEVEL
Display level 6
FACTORY RESET
Sh+sel=reset
SOFTWARE VERSION
DR84D2.M R991207
Revision 1.0
Page 3-5
Advertisement
Table of Contents
