Controlling The Analog Audio Output; Controlling The Aes Audio Outout; Front Panel Leds; Hd201X Front Status Leds - evertz HD2014 User Manual

4.1.8.

Controlling the Analog Audio Output

The AA OUT button on the front panel is designed to give quick and easy access to controls for analog
audio output signals. When the AA OUT button is pressed on the front panel, the user will immediately
be brought to the menu tree for the analog audio outputs. The menu tree presented includes the
MIXER, DAC GAIN CONTROL, FORCE SOFT MUTE and OUTPUT SOURCE menus. 5.1.4
4.1.9.

Controlling the AES Audio Outout

The AES OUT button on the front panel is designed to give quick and easy access to controls for AES
audio output signals. When the AES OUT button is pressed on the front panel, the user will
immediately be brought to the menu tree for the AES audio outputs. The menu tree presented includes
the MIXER, OUTPUT SOURCE, C BIT and FORCE PRO menus. The menus and their controls are
explained in section 5.2 of this manual
4.2.

FRONT PANEL LEDS

4.2.1.

HD201x Front status LEDs

The HD201x series has several front panel status LEDs.
descriptions for the front panel LEDs.
The right LED will be green when internal power supplies are present and
PSU:
functioning properly. The left LED will be red when a fault has been detected with
the internal power supplies. When ordered with dual redundant power supplies
(+2PS option) both supplies must be connected to AC power for the right green
LED to be illuminated and the left red LED to turn off.
The HD201x series has multiple fans providing airflow to cool internal electronics.
FAN:
All fans are located on the right hand side of the HD201x. Airflow through the unit
is left to right. The right LED will be green when all fans are operating properly.
The left LED will be red when a fault has been detected with any of the HD201x
fans.
This LED will be red when a serious internal fault has been detected within the
FAULT:
HD201x device.
This LED will be activated when a HD201x RCP (hardware RCP or software
COMMS:
RCP) is controlling the HD201x.
4.3.

ENGINEERING MENU SCROLL KNOB

The HD201x has a rotary shaft encoder on the right side of front panel, which is used for navigating the
engineering menu. The scroll knob can turn left and right to scroll up and down engineering menus.
Push the scroll knob in to select parameters and drill down into sub-menu layer.
FRONT PANEL OPERATION
HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
Revision 0.1
The following sections will provide
TM
Page 4-5