Table of Contents
Advertisement
3.7.7. Special VCG Indicators
The following special indicators are used between the seconds and frames digits of the time window in
the character inserter to identify non drop frame and drop frame code (NTSC only)
Non Drop Frame
Drop Frame (NTSC) Period (.)
The following special indicators are used between the hours and minutes digits of the generator time
window in the character inserter of the 8010-SIE-GPSII to identify when the GPS referenced time has is
being adjusted fore Daylight Saving Time
DST Time Off
DST Time On
3.7.8. Turning on the SDI Video Bypass
BYPASS MODE
Bypass mode off
Bypass mode on
3.8.
PROGRAMMING THE ENGINEERING SETUP FUNCTIONS
An engineering Setup menu is provided to set up items that are normally required only during
installation. To enter the front panel programming menu, press the SHIFT + SETUP keys. The two
vertical arrow keys ( ,
have selected the desired menu item, press the
that is currently selected will be blinking. When you have selected the desired sub menu choice press
the SELECT key to save your choice.
When you have made all the desired changes, press the SETUP key to return to the normal display
mode.
The following table shows the items in the main level of the engineering menu tree. Sections 3.5 to 3.7
provide detailed descriptions of each of the sub menus. The tables in these sections are arranged in
an indented structure to indicate the path taken to reach the control. Menu items or parameters that
are underlined indicate the factory default values.
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
Colon (:)
Colon (:)
Period (.)
The BYPASS MODE menu item is used to select whether the video
bypass relay will be active or not. This allows the user to manually put
the 8010-SIE in Bypass mode. In this mode, the input video is directly
connected to the output, and the encoder will no longer be active.
Alternatively the Bypass relay can be activated by pressing
SHIFT + BYPASS. The Front panel Bypass LED will be On when the
unit is in bypass mode.
Select Bypass mode off to turn off the Bypass relay and process the
incoming video through the source ID encoder.
Select Bypass mode on to activate the video bypass relay and disable
the encoder.
) allow you to move vertically within the engineering menu tree. When you
Revision 2.2
key to reveal the choices for that item. The choice
Page 3-18
Advertisement
Table of Contents
