Setting The Src Mode; Setting The C-Bit Control; Setting Audio Input Sources; Setting The Audio Input Sources For Aes Channels 1-16 - evertz 7772MFX-HD Manual

6.2.1. Setting the SRC Mode

Audio Control
SRC
Bypass BYPS
Enable ON
Automatic AUTO

6.2.2. Setting the C-bit Control

Audio Control
CBIT
Preserve PRO
Replace STMP

6.2.3. Setting Audio Input Sources

Audio Control
SRCS
SRC12
SRC34
SRC56
SRC78
SRC9A
SRCBC
SRCDE
SRCFG

6.2.4. Setting the Audio Input Sources for AES Channels 1-16

Audio Control
SRCS
SRC12
Normal DMX1
AES Input 1 AES1
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
This control sets the bypass mode of the audio sample rate converter.
When Enabled, audio is sample rate converted at 48 kHz, which is
synchronous to the input video. Audio can be either synchronous or
asynchronous to the video source.
When in Bypass mode, the content of the audio is preserved without any
loss, and directly embedded into the input video.
synchronous to the video source. If not, there may be samples that are
dropped or repeated.
When set to Automatic, the sample rate converter will be automatically
enabled when the module detects a PCM signal.
This control determines how the AES channel status bits are handled
when being routed from input to output. When set to preserve, the
module will preserve as many bits as possible, but always change to
professional 48 kHz. When set to replace, all the C-bits will be replaced
with static channel status message that reads professional 48 kHz.
The parameter selects input audio source between demuxed (embedded)
audio from the input video signal or the external AES inputs.
This parameter will select the source for audio channels 1 and 2.
The source can be the demuxed audio from the input signal or the
external AES 1 Input.
Revision 1.2
7700 MultiFrame Manual
Audio must be
7772MFX-HD - 13