Table of Contents
Advertisement
3.5.2. Configuring the Selecting the Format of the LTC Reader Time and User Bit Data
LTC RDR MODE
LR mode time data
LR mode time rtime
LR mode time date
LR mode data data
3.5.3. Controlling the LTC Reader 'Look Ahead' Compensation
LTC RDR DISPLAY
LR disp process
LR disp direct
OPERATION
Model 8010TM SDI Time Code Master Manual
The LTC RDR MODE menu item is used to select the type of
information that is contained in the time and user bits of the LTC
reader.
Select LR mode time data when the time bits contain normal time
information and the user bits contain numeric data.
Select LR mode time time when both the time and the user bits contain
time information.
Select LR mode time date when the time bits contain time information
and the user bits contain date information. The LTC RDR TZ ADJ
menu item controls whether local time or UTC will be displayed.
Select LR mode data data when both the time and the user bits contain
numeric data.
The LTC RDR DISPLAY menu item is used to select whether the
normal 'look ahead' compensation for LTC reader dropouts is active or
not. Normally, the data is read in one frame and displayed with an 'add
1 frame' compensation.
disable this feature and to display exactly what is being read. The
topmost positions of the character generator are not available when in
the direct mode.
Select LR disp direct to enable DIRECT display mode.
displayed exactly as it is read without 'look ahead' compensation.
Displays from the LTC reader will be 1 frame late and cannot be
positioned at the very top of the raster. DIRECT mode is usually used
for diagnostic purposes only.
Select LR disp process to enable normal 'look ahead' compensation.
Displays from LTC reader will be 'on time' but will NOT follow code
discontinuities immediately. PROCESSED mode should be used for
normal operations.
Revision 1.5.1
In some operational modes it is desirable to
Data is
Page 3-21
Advertisement
Table of Contents
