Search and Navigation
18
Search and Navigation
The Search function allows you to quickly find and mark the event of interest and
then go to the specified event in the marktable by navigating search events. The
search types include edge and pulse.
The Navigation function allows you to navigate time, search events, and segments.
18.1
Search
This function allows you to search for the specified edge and pulse width trigger
vents. Found search events are marked with small inverted triangles (
of the graticule. Click or tap
click or tap Search in the "Navigation" menu (only when the navigation mode is set to
"Search Event") to enter the "Search" menu, as shown in the figure below.
1. Search On/Off
Click or tap Search on/off switch to enable or disable the search function.
TIP
Enabling the search function automatically turns on the
2. Set up searches
DHO800 User Guide
192
> Search to enter the "Search" menu. You can also
Figure 18.1 Search Menu
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
) at the top
Zoom Mode (Delayed Sweep)
.