Waveform Color Of The Digital Channel - Rigol MSO5000-E Series User Manual

RIGOL
knob to ungroup the channels.
Note:
You can only ungroup the digital channels.
⚫
If no group is set, the Ungroup menu and the Group On/Off menu are
⚫
grayed out and disabled.

Waveform Color of the Digital Channel

When the digital channel is enabled, its corresponding waveforms and label are
displayed on the screen. This oscilloscope supports setting high logic level display
color, low logic level display color, and edge display color.
Press More → Color to enter the waveform color setting menu.
Press High, and rotate the multifunction knob
⚫
level. Press down the knob to select it. You can also press High continuously or
enable the touch screen to select it.
Press Edge, and rotate the multifunction knob
⚫
down the knob to select it. You can also press Edge continuously or enable the
touch screen to select it.
Press Low, and rotate the multifunction knob
⚫
level. Press down the knob to select it. You can also press Low continuously or
enable the touch screen to select it.
10-6
Chapter 10 Digital Channel
to set the color of high logic
to set the edge color. Press
to set the color of low logic
MSO5000-E User Guide