Base 10 Logarithm; Natural Logarithm - Rigol DS1000Z Series User Manual

Digital oscilloscope
Hide thumbs Also See for DS1000Z Series:
Table of Contents

Advertisement

Chapter 6 To Make Measurements

Base 10 Logarithm

Calculate the base 10 logarithm of specified signal source point by point and display
the results.
Press MATH  Math  Operator to select "lg":
Press Display to turn on or off the base 10 logarithm operation function.
Press Source to select the desired channels (CH1, CH2, CH3 or CH4).
Press Offset and use
Press Scale and use
Press Scale Reset, the instrument will adjust the vertical scale to the best value
according to the current configration automatically.
Press Options to set the start point, end point or turn on or off the inverted
display of the operation results.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Auto Scale to turn on or off the auto scale function. When "ON" is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.
HORIZONTAL
used to adjust the horizontal position and scale of the operation results.

Natural Logarithm

Calculate the natural logarithm of specified signal source point by point and display
the results.
Press MATH  Math  Operator to select "ln":
Press Display to turn on or off the natural logarithm operation function.
Press Source to select the desired channels (CH1, CH2, CH3 or CH4).
Press Offset and use
Press Scale and use
Press Scale Reset, the instrument will adjust the vertical scale to the best value
according to the current configration automatically.
Press Options to set the start point, end point or turn on or off the inverted
DS1000Z User's Guide
to adjust the vertical offset of the operation result.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
to adjust the vertical offset of the operation result.
to adjust the vertical scale of the operation results.
RIGOL
SCALE can also be
6-15

Advertisement

Table of Contents
loading

Table of Contents