Using A Button On The Scanner To Start Scanning - Ricoh fi-70F Operator's Manual

Using a Button on the Scanner to Start Scanning

This section explains about the basic flow of performing a scan using an image scanning application on
the computer started by pressing the [Scan] button on the scanner.
In this case, there are necessary settings to be set in advance in order to perform a scan.
1
Button Settings (page 29)
Configure the settings on the computer for the [Scan] button on the scanner. Specify an image
scanning application for the button so that the application can be used to scan documents.
Display the [Devices and Printers] setting window for Windows, and set the button in [Scan
properties] for the scanner. For details, refer to
2
Settings on the Image Scanning Application
For some image scanning applications, settings on the image scanning application may be
necessary.
For details, refer to the help for the image scanning application.
3
Operations on the Scanner (page 31)
Load documents in the scanner and press the [Scan] button.
Pressing the button starts the image scanning application and starts scanning.
Button Settings (page
28
How to Perform a Basic Scan
29).