Section Area (Multi Area Settings) - Ricoh IS420 User Manual

Section area (Multi area settings)

¡
Function:
Usage:
03_IS430-BODY
Within the scannable area, you can set rectangular areas and define scanning modes
such as binary scanning, halftone scanning, or binary filter etc. for each area. Six
areas can be set for one scan. These areas can be piled on top of one another and the
last defined area is valid.
Note:
If six areas are piled, depending on how they are piled, scanning may not result in the
correct mode. Reset the areas, after decreasing the number of areas or their sizes.
When scanning an original which includes binary images and halftone images, you
can scan each image with its own composition method in one scanning.
Original / Example settings
d
Scanned in example settings
Page 29
Image Scanner User's Manual
1. Set binary composition for the whole
scannable area.
2. Set halftone composition for this area.
3. Set halftone composition for this area.
4. Set halftone composition for this area.
In the case of scanning without this function
S c a n n e d w h o l e
area in binary set-
ting
97.5.8, 5:36 PM
Scanned whole area
in halftone setting
- 29 -
PageMaker 5.0J