Cleaning; Cleaning The Contact Glass, Adf Contact Glass, White Sheet, And White Plate - Ricoh IS330DC - IS - Flatbed Scanner Operating Instructions Manual

Cleaning

R WARNING:
• Never remove any covers or screws other
than those specified in this manual. The
inside of the scanner contains high-volt-
age components that can cause electrical
shock. Have all inspections, adjustments,
and repairs inside the scanner performed
by an authorized dealer only.
• Do not attempt to modify this scanner in
any way. Modification can cause fire or
electrical shock.
R CAUTION:
• When disconnecting the power cord, al-
ways make sure to hold onto the plug. Do
not pull on the power cord itself. This can
cause damage to the cord, fire or electrical
shock.
We recommend periodically cleaning
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
Important
Do not use volatile chemicals such
as benzene, paint thinner or spray
with insecticides. This can cause
deformation, discoloration and
cracking.
Wipe off the Automatic Document
Feeder (ADF) with a dry, clean
cloth when there is dust or soiling
present inside.
Cleaning the Contact Glass,
ADF Contact Glass, White
Sheet, and White Plate
R CAUTION:
• Be careful not to pinch your fingers when
closing the Automatic Document Feeder
(ADF).
A
Turn off the power of the scanner
and unplug the power cord from
the outlet.
B
Wipe off the scanner with a dry,
soft cloth.
1
2
3
4
1.
White Plate
2.
White Sheet
3.
ADF Contact Glass
4.
Contact Glass
Cleaning
3
ZDLH060E
21