Panasonic KX-NS300 Pc Programming Manual page 85

If applicable, a list of field names found in the imported file will be displayed.
5. For the Feature - Speed Dial and Caller ID table, select the Speed Dial table to which to import the
data (system or tenant) from the drop-down list.
6. If required, select import fields.
When import fields can be selected, the selection screen is displayed automatically. Matching origin and
destination fields are entered by default.
•
To change the destination for an import field, select the preferred field from the drop-down list.
•
To not import a field, select the blank option from the drop-down list.
7. Click OK to perform the import operation.
Depending on the type of data imported, the relevant programming screen may be displayed.
•
Click OK or Apply to complete the import operation.
If data in a field being imported does not match the required format for the import destination, an error
message will be displayed when the import operation is attempted, and the operation will be cancelled.
This can occur when, for example, the destination field can only accept numeric data, but the data being
imported contains alphabet characters, as the correct fields were not linked together.
Notices Regarding Importing Data from KX-TDA100/KX-TDA200 PBXs to the PBX
Quick Dial
The PBX only supports an 8-digit Quick Dial format. Therefore, KX-TDA100/KX-TDA200 Quick Dial data in
the 4-digit format cannot be imported.
6.6 Tool—Import
PC Programming Manual 85