Panasonic KX-NS300 Pc Programming Manual page 673

27.4 Network Service—[4] Other
27.4.1 Network Service—[4-1] Other—Security
Network security settings can be programmed.
Name
ICMP Echo Reply—LAN
Port
ICMP Echo Reply—Log
Output
TLS—Encryption Suite
27.4.2 Network Service—[4-2] Other—NAS
NAS settings can be programmed.
Name
NAS Status
NAS Setting—
Protocol
NAS Setting—NAS
Address—IP
Address
NAS Setting—NAS
Address—Name
NAS Setting—Port
No.
NAS Setting—Mount
directory
CIFS Setting—User
Name
CIFS Setting—
Password
Description
Specifies if the LAN port will send ICMP
echo-replies to incoming ICMP echo-
requests.
Specifies if the PBX logs ICMP echo-
replies.
Specifies the method of encryption
used for TLS.
Description
Displays/changes the connection
status of the NAS.
Specifies the communication
protocol for the NAS connection.
Specifies the IP address of the
NAS.
Specifies the Name of the NAS.
Specifies the NAS using port
number.
Specifies the NAS mount directory.
Specifies the NAS connection user
name when NAS Setting—
Protocol is set to CIFS.
Specifies the NAS connection
password when NAS Setting—
Protocol is set to CIFS.
27.4 Network Service—[4] Other
Value Range
Enable, Disable
Enable, Disable
AES256-SHA, DES-
CBC3-SHA, AES128-
SHA, DES-CBC-SHA,
AES128-SHA2, AES256-
SHA2
Value Range
Connected, Disconnected
To change the connection status of
the NAS, perform the following:
•
Click Disconnect to set the
NAS to disconnect status.
•
Click Connect to set the NAS to
connect status.
NFS, CIFS
1.0.0.1–223.255.255.254
Max. 253 characters
445, 1024–65535
Max. 128 characters (multi-byte
characters allowed)
Max. 24 characters (multi-byte
characters allowed)
Max. 24 characters (multi-byte
characters allowed)
PC Programming Manual
Links
Links
673