Panasonic KX-NS300 Pc Programming Manual page 198

9.8 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-SIPGW
Name
100rel Ability
Ringback
Tone to Outside
Caller
SIP QoS
Ability
SIP QoS-ToS
Priority
SIP QoS-ToS
Type
Timer
Name
Specifies the retransmission interval time for INVITE requests
SIP T1
and responses.
SIP T2 Specifies the retransmission interval time for INVITE responses
and non-INVITE requests.
NAT Traversal 1-8
Name
Name
NAT Traversal
198 PC Programming Manual
Description
Specifies whether to add the option tag
100rel to the header field of the INVITE
message.
Enables the PBX to send a ringback tone
to an outside caller when the network
cannot send the tone.
Specifies the type of value to be stored in
the ToS field in the IP header.
Specifies the priority level in the ToS field
when "ToS" is selected in
Ability.
Specifies the ToS type in the ToS field
when "ToS" is selected in
Ability.
Description
Description
Specifies the name of NAT Traversal configuration.
This value is displayed in NAT Traversal Table in
9.10 PBX Configuration—[1-1] Configuration—Slot
—Port Property—V-SIPGW—NAT
Specifies the NAT traversal method.
–
STUN: A STUN Server, used alongside the SIP
Server, finds out the global IP address of the
router with NAT enabled.
–
Fixed IP Addr.: The global IP address of the
router with NAT enabled is fixed.
Note
Manual programming is optional except when
programming is required depending on the
network conditions.
Disable: This feature is not
activated.
Enable (Active): Activates this
feature only if the other
device supports the feature.
Enable (Passive): Activates
this feature only when
requested by the other
device.
Disable, Enable
ToS, DSCP, HEX
0–7
SIP QoS
Normal, Monetary Cost,
SIP QoS Reliability, Throughput, Delay
Value Range
Value Range
5–255 × 100 ms
40–255 × 100 ms
Value Range
Max. 20 characters
Off, Fixed IP Addr.,
STUN
Links
Links
Links