Panasonic KX-NS300 Pc Programming Manual page 295

9.32 PBX Configuration—[1-1] Configuration—Slot
—Port Property—E1 Port
Various settings can be programmed for each E1 channel. To change the status of ports, click Command.
Name
Shelf
Slot
CH
Connection
Subscriber
Number
Channel Type
Trunk
Property
9.32 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Description
Indicates the shelf position (reference
only).
Indicates the slot position (reference
only).
Indicates the channel number
(reference only).
Indicates the channel status
(reference only).
This column offers two ways to open
the screen to select the channel
command:
•
Click the desired cell in the
column.
•
Select the desired cell in the
column, and then click Command.
Specifies the number used as the
CLIP number.
Selects the channel type.
Selects the trunk property of the E&M
channel.
Value Range
Shelf number
Slot number
channel number
INS: The channel is in
service.
OUS: The channel is
out of service.
Fault: The channel is
not communicating with
the network.
Max. 16 digits
(consisting of 0–9, *,
and #)
Undefined: Not
assigned
DR2: Digital System R2
Public: Use the
DIL/DDI/DID method to
distribute incoming
trunk calls.
Private: Use the TIE
line service between
two or more PBXs.
PC Programming Manual
Links
Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
Feature Manual
References
2.29.1 E1 Line
Service
Feature Manual
References
2.1.1.1 Incoming
Trunk Call Features
—SUMMARY
4.1.2.1 Integrated
Services Digital
Network (ISDN)—
SUMMARY
4.3.1 TIE Line
Service
295