Panasonic KX-NS300 Pc Programming Manual page 173

Name
Signalling (PTAP)
UDP Port No.
(Server)
Signalling (MGCP)
UDP Port No.
(Server)
Signalling (MGCP)
TLS Port No.
(Server)
CWMP (HTTP) Port
No. for SIP-MLT
CWMP (HTTPS) Port
No. for SIP-MLT
Data Transmission
Protocol (HTTP) Port
No. for SIP-MLT
Data Transmission
Protocol (HTTPS)
Port No. for SIP-MLT
Firmware Update
Port No. for IP-PT/
IP-CS (Media Relay)
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Description
Specifies the UDP port used by the
V-IPEXT card to transmit and receive
PTAP (Panasonic Telephony
Administration Protocol) data. This
must be changed if another network
application is using the same port.
To change the value displayed here,
click Common Settings and set the
desired value.
Specifies the UDP port used by the
V-IPEXT card to transmit and receive
MGCP (Media Gateway Control
Protocol) data. This must be changed
if another network application is using
the same port.
To change the value displayed here,
click Common Settings and set the
desired value.
Specifies the TLS port number used
for the MGCP signalling server.
Specifies the HTTP port of the PBX-
side ACS for control communication
with KX-UT series SIP phones.
Specifies the HTTPS port of the PBX-
side ACS for control communication
with KX-UT series SIP phones.
Specifies the HTTP port of the PBX-
side ACS for data communication with
KX-UT series SIP phones.
Specifies the HTTPS port of the PBX-
side ACS for data communication with
KX-UT series SIP phones.
Specifies the IP-PT/IP-CS firmware
update port number.
Value
Range
1024– Feature Manual
65535
References
5.2.1 IP Proprietary
Telephone (IP-PT)
1024– Feature Manual
65535
References
5.2.1 IP Proprietary
Telephone (IP-PT)
1024–
65535
0–65535 Feature Manual
(Setting "0"
References
will close
5.2.2.3 Simple Remote
port access
Connection
for this
feature)
0–65535 Feature Manual
(Setting "0"
References
will close
5.2.2.3 Simple Remote
port access
Connection
for this
feature)
Feature Manual
0–65535
(Setting "0"
References
will close
5.2.2.3 Simple Remote
port access
Connection
for this
feature)
0–65535 Feature Manual
(Setting "0"
References
will close
5.2.2.3 Simple Remote
port access
Connection
for this
feature)
0–65535
PC Programming Manual
Links
173