Panasonic KX-NS300 Pc Programming Manual page 280

9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Name
CRC4 Mode Enables the use of CRC4 for error
checking. CRC (Cyclic Redundancy
Check) is an error checking control
technique that uses a specific binary
prime divisor that results in a unique
remainder. It is usually a 16- to 32-bit
character. (Assignable only when using
the PRI30 card.)
Line Coding Selects the line coding type of the PRI
PCM (Pulse Code Modulation) for the
port. This setting is only available when
using the PRI23 card.
Frame Selects the type of frame sequence for
Sequence the port. This setting is only available
when using the PRI23 card.
CO Setting
CO Setting parameters are not applicable to ports assigned as Extension in Port Type.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Type Selects the port type.
Note
Connection Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select INS or
OUS for the port.
This option is only available in
On-line mode.
280 PC Programming Manual
Description
Description
•
Each ISDN connection in
a QSIG network must
have a master port on
one PBX and a slave port
on another PBX.
•
ISDN extensions can
belong to an incoming
call distribution group or
idle extension hunting
group. In this case, an
MSN can be assigned.
Value Range
Disable, Enable
B8ZS, AMI
Extended Multi frame
(ESF), 4-Frame Multi frame
(F4), 12-Frame Multi frame
(F12)
Value Range
CO: For connecting to
public network
Extension: For
connecting to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Links
Links