Panasonic KX-NS300 Pc Programming Manual page 485

13.3 PBX Configuration—[5-3] Optional Device—
Voice Message
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice
Message—DISA System
Direct Inward System Access (DISA) enables outside callers to access specific PBX features as if the caller
were using an SLT extension of the PBX.
For more information on DISA, see "2.16.1 Direct Inward System Access (DISA)" in the Feature Manual.
Option 1
Name
DISA Security—
DISA Security
Mode
DISA Security—
Remote Walking
COS through
DISA without
PIN (Activation
Key Required)
DISA Intercept—
Intercept when
destination
through DISA
sets DND
DISA Intercept—
Intercept when
all DISA ports
are busy
DISA Intercept—
Intercept when
No Dial after
DISA answers
Description
Selects the DISA security
mode to prevent unauthorised
access to the PBX. In Trunk or
All Security mode, the caller is
required to override security by
Walking COS or Verification
Code Entry in order to enable
the restricted feature
temporarily.
Enables registered caller ID
numbers to be automatically
recognised as PBX extensions
when calling through DISA,
and to use the Walking COS
features without entering a
PIN.
Selects how DISA calls are
handled if the destination sets
DND, and disables Idle
Extension Hunting.
Selects how DISA calls are
handled if all DISA ports are
currently in use.
Selects how DISA calls are
handled if the caller does not
select any option from the
menu.
13.3 PBX Configuration—[5-3] Optional Device—Voice Message
Value Range
None: Intercom calls, TIE
line calls, and trunk calls
can be made.
Trunk: Intercom calls and
TIE line calls without
PBX code can be made.
TIE line calls with PBX
code and trunk calls are
restricted.
All: All calls are
restricted.
Disable, Enable (Get
DISA)
Busy Tone, Enable, Busy
Message
to Operator, to AA-0, to
AA-9, Disable (Busy
Tone)
to Operator, to AA-0, to
AA-9, Disable (Reorder
Tone)
Links
Feature Manual
References
2.7.5 Walking COS
2.7.6 Verification Code
Entry
PC Programming Manual 485