Panasonic KX-NS300 Pc Programming Manual page 323

Name
During Conversation
—DTMF Signal
Length (ms)
During Conversation
—DTMF Inter-digit
Pause (ms)
During Conversation
—Pause Signal Time
(s)
System Wireless—
PS Out of Range
Timer (s)
SVM—Recording
Time (s)
Description
Specifies the length of time that a
DTMF signal is sent when a number
is dialled from a PT or PS during a
conversation.
Specifies the length of time between
DTMF signals when numbers are
dialled in succession from a PT or
PS during a conversation.
Specifies the length of the pause
inserted when the PAUSE button is
pressed during a conversation.
When the destination of an incoming
call is a PS, specifies the length of
time the PBX searches for the PS
before setting its status to Out of
Range.
If "0" is assigned, the timer is
controlled by the cell station.
Specifies the maximum length of a
message recorded by the SVM
feature.
10.3 PBX Configuration—[2-3] System—Timers & Counters
Value
Range
80 ms,
160 ms,
240 ms,
320 ms
64 + 16 ×
n (n=0–
15) ms
1.5 s, 2.5
s, 3.5 s,
4.5 s
0–30 s
1–600 s
Links
Feature Manual
References
2.5.4.7 Pause Insertion
PC Programming
Manual References
10.9 PBX Configuration—
[2-9] System—System
Options—System Wireless—
Out of Range Registration
Feature Manual
References
4.3.6.1 PS Roaming by
Network ICD Group
PC Programming
Manual References
12.1.8 PBX Configuration—
[4-1-8] Extension—Wired
Extension—Simplified Voice
Message
12.2.6 PBX Configuration—
[4-2-6] Extension—Portable
Station—Simplified Voice
Message
Feature Manual
References
2.16.3 Built-in Simplified
Voice Message (SVM)
PC Programming Manual 323