Panasonic KX-NS300 Pc Programming Manual page 29

4. After you successfully log in to Web Maintenance Console, the Home screen will be displayed and
programming can be performed. For details about accessing the different features of Web Maintenance
Console, see 3.1 Home Screen.
Connecting to Web Maintenance Console (Off-line Mode)
To connect to Web Maintenance Console in Off-line mode, use the New -Offline Mode or Open -Offline
Mode operations in the Off-line Web Maintenance Console programme launcher. For details, refer to
1.2.2 PC Programming Using Off-line Mode.
1.2.2 PC Programming Using Off-line Mode
PC Programming is performed by connecting to the PBX using Web Maintenance Console, which is also
known as On-line mode. However, as certain programming requires installed cards to be set to out of
service (OUS), or requires system settings to be changed, some programming cannot be performed while
the PBX is in use. Off-line mode programming is performed using the Off-line version of Web Maintenance
Console, which you install on your PC.
Off-line mode allows you to create new system data files and make modifications to system data files stored
on your PC, without being connected to the PBX. The programming changes can be saved and then later
uploaded to the PBX.
The following procedures outline how to install and use the Off-line Web Maintenance Console for Off-line
mode programming.
Installation
Note
•
Be sure to install and use the latest version of "KX-NS Unified Web Maintenance Console".
•
Before beginning the installation of Off-line Web Maintenance Console, the following software must
be installed on the PC:
–
Microsoft .NET Framework 2.0
–
Microsoft .NET Framework 4
This software can be downloaded from Microsoft's online Download Center.
•
To install or uninstall the software on a PC running Windows 7, Windows 8.1, Windows 8.1
Professional or Windows 10, you must be logged in as a user in the "Administrators" group.
1. Copy the "KX-NS Unified Web Maintenance Console" setup file to your PC.
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the installation wizard.
The Programme Launcher
After Off-line Web Maintenance Console has been installed, you can run the Programme Launcher from the
Windows Start menu.
1.2.2 PC Programming Using Off-line Mode
PC Programming Manual 29