Panasonic KX-NS300 Pc Programming Manual page 282

9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Name
Loopback Enables a loopback test started
Test started from the network side, to be
by Network performed on the PRI23 card.
Extension Setting
Extension Setting parameters are applicable only for the PRI extension port.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Type Selects the type of the port.
Note
Connection Indicates the port status. To change
the status of the port, click the
desired cell in the column, and then
select INS or OUS for the port.
This option is only available in On-line
mode.
Ring Mode Selects the ring mode when receiving
(ISDN MSN an incoming call with an MSN ending
Last No. 0 or with "0" or "00".
00)
Network Configuration
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
282 PC Programming Manual
Description
Description
•
Each ISDN connection in a
QSIG network must have a
master port on one PBX and a
slave port on another PBX.
•
ISDN extensions can belong to
an incoming call distribution
group or idle extension hunting
group. In this case, an MSN
can be assigned.
Value Range
Disable, Enable
Value Range
CO: For connecting to public
network
Extension: For connecting to
extension
QSIG-Slave: For connecting to
private network (slave port)
QSIG-Master: For connecting
to private network (master
port)
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Ring All Extension for MSN:
Ring all ISDN extensions that
are addressed with MSN.
Ring AN Extension for MSN:
Ring only one of the ISDN
extensions that are addressed
with MSN.
Links
Links
Feature
Manual
References
5.2.5.1 ISDN
Extension