Panasonic KX-NS300 Pc Programming Manual page 77

6.2 Tool—BRI Automatic Configuration
Automatically configures the network settings of the BRI card.
This option is only available at Installer level in On-line mode.
This tool automatically inputs values into the fields L1 Mode, L2 Mode, Access Mode, and TEI Mode, on
the Network tab of the 9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
screen.
Note
•
To use this tool, the card to be configured must be pre-set to OUS status. For more details, see
2.1.5 Card Status.
•
At any time on this screen, you can click Cancel to return to the previous screen without saving.
To configure the BRI card
1. In Check, select the card, and then click OK.
2.
Click Execute.
The results of the automatic configuration will be displayed.
3. Click the Check Box cell for the ports that have been configured.
4. Click to Data Apply save these results to the BRI card.
6.2 Tool—BRI Automatic Configuration
PC Programming Manual 77