Panasonic KX-NS300 Pc Programming Manual page 384

11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Name
Trunk Specifies the trunk group assigned
Group No. to the corresponding priority level.
& Name Select the blank option to not
assign a trunk group to the priority.
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller
ID Modification
The telephone numbers of incoming callers can be modified automatically according to pre-programmed
modification tables, and then recorded for calling back.
Leading Digits
After the caller's number is modified by the Length of Digits Modification Tables or CLIP Modification Tables,
the PBX checks the leading digits of the modified number for an area code programmed in the Caller ID
Modification Table assigned to that trunk group. If it finds such a code, it removes digits and adds a number
to the modified number. If this number is stored as a System Speed Dialling number, the caller's name can
be shown on a PT display and the call can be routed to a certain extension (CLI destination). A maximum of
4 Caller ID Modification Tables, each containing 10 local/international call data and 1 long distance code,
can be programmed. Each trunk group can select a table for use. Select the desired table from the
Modification Table list.
If the modified number does not contain an area code programmed here, the PBX applies the Long
Distance Code settings to the modified number.
Name
Area Code (for
Local /
International Call
Data 1–10)
Removed
Number of Digits
384 PC Programming Manual
Description
Description
Specifies the leading
number (area code) to
look for in the incoming
caller's number.
Specifies the number of
digits to be removed
from the beginning of the
incoming caller's
number.
Value
Range
Trunk Group PC Programming Manual
No. 1–64
References
18.1 PBX Configuration—[10-1] CO
& Incoming Call—CO Line Settings
Feature Manual References
2.5.5.3 Trunk Access
Value Range
Max. 6 digits Feature Manual References
(consisting of 0–
2.19.1 Caller ID
9, *, and #)
0–9 PC Programming Manual
References
11.1.1 PBX Configuration—[3-1-1]
Group—Trunk Group—TRG Settings
—Caller ID Modification Table
14.1 PBX Configuration—[6-1]
Feature—System Speed Dial
Feature Manual References
2.19.1 Caller ID
Links
Links