Panasonic KX-NS300 Pc Programming Manual page 247

Name
Packet
Sampling Time
(G.729A)
Voice Activity
Detection for G.
711
Announce
Mode
Remote Place
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
CS Name Specifies if the IP-CS
(KX-NS0154 only) name of the
port.
Connection Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select INS or
OUS for the port. This option is
only available in On-line mode.
Phone Specifies the location of IP-CS
Location (KX-NS0154 only) connected to
the port.
9.18 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPCS
Description
Specifies the time interval between measurements
(samples) of sound data during a conversation.
The smaller this number, the higher the quality of
the transmitted sound.
Enables the use of the Voice Activity Detection
feature for the G.711 codec. This feature
conserves bandwidth by detecting silent periods
during a call and suppressing the packets of
silence from being sent to the network.
Specifies if the IP-CS's (KX-NS0154 only) built-in
ANNOUNCE feature is enabled. An IP-CS
(KX-NS0154 only) in a remote location with
ANNOUNCE enabled can provide the PBX's IP
Address information to other terminals in the
remote location in place of manually programming
the PBX's IP address at each terminal.
Description
20 ms, 30 ms, 40 ms, 50
ms, 60 ms
Disable, Enable
Disable, Enable
Value Range
Max. 20 characters
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not
communicating with the network.
Local: The IP-CS (KX-NS0154
only) is located on the same
network as the PBX (standard
configuration).
Remote (MRG): The IP-CS
(KX-NS0154 only) is accessing
the PBX remotely (use Media
Relay Gateway).
Value Range Links
Links
Feature Manual
References
5.2.7 IP-CS
(KX-NS0154)
Feature Manual
References
5.2.7 IP-CS
(KX-NS0154)
PC Programming Manual 247